BEOGRAM 4004 SERVICED

Description

BEOGRAM 4004 SERVICED. Condition is "Seller refurbished".
BEOGRAM 4004 JUST SERVICED : The belts have been replaced, the cartridge is a second hand in very good condition, all the resistors and caps have been tested, the contacts have been cleaned with KF Contact spray, the tonearm lift has been adjusted. So it is a Beogram 4004 in excellent condition. Some faint scratches on the bottom.
DESCRIPTION
The Beogram 4004 is a special version of the Beogram 4002 for use with the Beomaster 2400-2. A 7 pin plug was fitted to the signal lead which contained the connections necessary to allow the Beomaster to stop and start the turntable, and because the turntable was fully automatic this made remote operation from the Beomaster’s ultrasonic remote control terminal possible. The system of control used was quite simple, and was not similar to or compatible with the Datalink system found on later models, despite the similar connector. The Beogram 4004 was nevertheless the first remote controllable turntable offered by B&O. It was replaced by the Beogram 8000 range.